bossarea-boss-dm-2-delayBoss DM-2 Delay

This analog delay pedal is able to produce delay times ranging from 30 to 330 Milliseconds. It’s got three dials with adjustments for Repeat Rate, Intensity, and Echo. This effect draws a lot of current so not all power supplies are able to power up this pedal. The vintage analog DM-2 is a very popular effect and prices are usually very high for a beat up but working pedal.

Version differences
There are at least 3 different versions of the DM-2. The first version was using the MN3005 BBD. This was soon changed to the low current version of the same circuit called MN3205. It is worth noting that the MN3005 has a SN ratio of 75 dB while the MN3205 is a little more noisy with its 67dB. The MN3205 only produces 0.8% distortion compared to 1% for the MN3005.

The DM-2 can be approximately dated by reading the number on the compander IC NE570N. It should have a 4 digit number giving you the year and month of production in the form YYMM. Note that this is the production date of the integrated chip and not of the pedal but it’s unlikely that the chips were stored for very long before used.

      DM-2

 

      Marking of PCB: ET-5214-510

 

      BBD: MN3005

 

      Clock Driver: MN3101

 

      DM-2A

 

      Marking of PCB: ET-5214-510A

 

      BBD MN3205

 

      Clock Driver: MN3102

 

      DM-2B

 

      Marking of PCB: ET-5214-510B

 

      BBD: MN3205

 

      Clock Driver: MN3102

 

Specifications

  • Controls: Repeat Rate, Echo, Intensity
  • Connectors: Input, Output, AC Adaptor
  • Current Draw: 11 mA (DC 9V)
  • Weight: 450g.
  • Input Impedance: 470kOhm
  • Output Impedance: Over 10kOhm
  • Residual Noise Level: -100dBm (IHF-A)
  • Delay Time: 20ms-300ms
  • Recommended AC Adaptor: ACA Series

Labels

  • Black – Made In Japan
  • Green – Made In Japan

The DM-2 was sold from June 1981 to February 1984.



Leave a Reply

Your email address will not be published. Required fields are marked *